Quick Answer: Is Liquid Chlorine The Same As Shock?

How long is liquid chlorine good for?

Liquid pool chemicals, on the other hand, tend to have a shorter shelf life.

For example, dry pool chlorine will not expire for a long time, while liquid pool chlorine will expire quickly.

If you have any pool chemicals in liquid form, they will only last up to two months before they begin to become ineffective..

Does liquid chlorine have stabilizer?

Salt Chlorinators, aka salt chlorine generator will create most of the chlorine needed for your pool. … But of course, like using liquid chlorine, no stabilizer is added to the chlorine that your salt system creates, although maintaining a 20-40 ppm CYA level is recommended for most outdoor pools.

How much liquid chlorine do I put in a 5000 gallon pool?

Q: How Much Chlorine Do I Put in A 5000 Gallon Pool? A: 0.00013 ounces of chlorine is recommended per 1 gallon of water. Therefore, for a 5,000-gallon pool, you will need 0.65 ounces of chlorine.

How much liquid chlorine do you need to shock a pool?

12.5% Liquid Chlorine Pool Shock – Normal Dosage: 1 gallon of shock per 10,000 gallons of water. Shock Dosage: 2 gallons of shock per 10,000 gallons of water.

Is liquid chlorine better than tablets?

It helps that tablets are cost-effective too and have a long shelf life. On the other hand, if you want to go for a simpler way to sanitize your pool without the side effects of CYA and if hauling around gallons of liquid is no problem, then go for liquid chlorine.

Can you mix liquid chlorine and shock?

Adding chlorine besides the shock can increase the chlorine content in the water which can make the entire shocking process useless. Hence, it is better if you don’t use the shock and chlorine at the same time. The best time to add chlorine to the pool water is after you have shocked the pool.

Will Liquid chlorine raise pH?

Liquid chlorine will raise the pH more than powder chlorine. Either muriatic acid or sodium bisulfate can be used to neutralize these alkaline compounds. The pH increases caused by either liquid or powder chlorine are usually not as great as the drop caused by chlorine gas. In some cases no pH adjustment may be needed.

How much liquid chlorine do I put in a 20000 gallon pool?

The most important factor though is the size of the pool. You’ll need about 52-104 oz of liquid chlorine per 10,000 gallons of water. This amount should get the chlorine level to between 5 and 10 ppm.

How much liquid chlorine do I need for a 1000 gallon pool?

If the water is clean and clear, then add about 3 oz of liquid chlorine per 1000 gallons of water – while the pool filter is running. This should give you a chlorine level of about 3 ppm.

How long after adding liquid chlorine can you swim?

It is safe to swim once your chlorine levels are around 5 ppm or after 24 hours. It is always best to test first! Muriatic acid can create a hot spot of acid in the water that could potentially burn or irritate your skin. It is best to wait 30 minutes after adding it to your pool.

Which is better liquid chlorine or shock?

Liquid chlorine is generally less costly than granular shock and comes in refillable containers, where granular shock does not. Liquid chlorine does not need to dissolve in your water as it is already in liquid form. In addition, liquid chlorine is non-scaling and leaves no residue.